Ridge, Hip and Valley Repairs · All 26 counties
Ridge Tile Repair in Ireland: Ridges, Hips and Valleys
Free, no-obligation quotes for ridge, hip and valley repairs on Irish homes. Re-bedding, dry ridge systems, lead and GRP valleys.
- Free repair quotes
- No obligation
- Add a photo if you have one
- Homes in all 26 counties

CedralVeluxKingspanFirestone EPDMLeadNatural Slate
How Ridges, Hips and Valleys Are Repaired
Ridge and hip tiles run along the top and the corners of the roof, traditionally bedded in mortar. Over time the mortar cracks and washes out, and the tiles loosen or blow off in high winds. Valleys carry water where two roof slopes meet, so a blocked or split valley can let in a lot of water quickly.
Re-bedding ridge tiles
Loose ridge tiles are lifted, the old mortar is cleaned off, and the tiles are re-bedded in fresh mortar.
Get a repair quoteDry ridge systems
A dry ridge system fixes each ridge tile mechanically, with no mortar to crack, and lets the roof space ventilate along the ridge.
Get a repair quoteHip tiles
Hip tiles on the sloping corners of the roof are re-bedded or dry fixed in the same way as ridge tiles.
Get a repair quoteLead valleys
Split or worn lead valleys are relined in new lead sheet, dressed and fixed to allow for expansion.
Get a repair quoteGRP valleys
GRP fibreglass valley troughs are a common replacement for worn lead or mortar valleys on tiled roofs.
Get a repair quoteClearing valleys
Leaves, moss and debris build up in valleys and push water sideways under the slates. Clearing them is often the whole fix.
Get a repair quoteSigns of Ridge or Valley Problems
Mortar in the gutter
Pieces of mortar in the gutter or on the ground below the ridge.
Crooked ridge line
A ridge line that is no longer straight, or a gap where a ridge tile is missing.
Gaps under ridge tiles
Daylight or gaps visible under the ridge tiles from the ground.
Damp along a valley
Wet timbers in the attic along the line of a valley, or damp in the corner of a ceiling.
Leaking now? Do this first
- 1Move belongings and put a bucket under the drip.
- 2If water is near lights or sockets, switch off that circuit at the fuse board.
- 3Stay off the roof. Check from the ground or the attic only.
- 4Take photos of the ceiling, the attic and the roof from the ground.
- 5Request a repair quote and mark it as an emergency.
Mortar or Dry Fix?
Mortar bedded
The traditional method and often required on period homes and protected structures. Mortar needs checking and repointing over time.
Dry ridge
Mechanically fixed with clips and seals. No mortar to wash out, and it ventilates the roof space along the ridge.
Valley liners
Lead suits slate roofs and older homes. GRP valley troughs are common on concrete tile roofs.
Repair or replace?
What to expectA few slipped slates, one loose ridge, a failed flashing, a single flat roof split.
Leaks in several places, brittle or torn felt in the attic, slates flaking across the roof, a flat roof deck that feels soft.
Rules and Standards to Know
The NSAI Code of Practice S.R. 82:2017 sets slating and tiling practice for Irish pitched roofs, including fixings for Irish wind exposure.
Like-for-like repairs usually do not need planning permission. Homes on your local council's Record of Protected Structures are different, so check with the council before work starts.
All Irish bat species are protected. Works that disturb a roost need a derogation licence from the National Parks and Wildlife Service.
Under the Construction Regulations 2013, a homeowner who hires a roofer is a client. Ask how the job will be made safe, including ladders, roof ladders or scaffolding.
What Homeowners Say About Our Local Roofers
“Had a bad leak over the kitchen after the recent lashing of rain, plus a few slipped slates near the gutter. Called these lads out and they sorted it straight away. Sound to deal with, quick, and left the gaff spotless. Spot on service.”
“A few tiles blew off our roof during the wind last week. Got in touch and they had someone round the next morning to patch it up and match the old slates. Brilliant job, very reasonable price, and lovely lads. Cheers!”
Ridge, Hip and Valley Repairs: Questions Homeowners Ask
Is a dry ridge better than mortar?
Both work when installed properly. A dry ridge has no mortar to crack and ventilates the roof space. Mortar is traditional and often preferred on period homes and protected structures.
Can a ridge tile be refixed after a storm?
Usually, yes, if the tile is not broken. Ridge tiles that have blown off often break, so replacements of the same profile may be needed.
Why is my valley leaking?
The most common causes are a build-up of leaves and moss, split or worn lead, or cracked mortar along the valley edge. A roofer clears it first, then repairs or relines it.
Do ridge repairs need scaffolding?
Not always. Some ridge repairs are done from roof ladders, while others need scaffolding for safe access. The roofer decides based on the roof and the job.
What if there are bats in my roof?
Bats and their roosts are protected. Works that disturb them need a licence from the National Parks and Wildlife Service, and ridge work is a common time they are found.
Other Roof Repairs
Get a Ridge Tile Repair Quote
Tell us what is happening with your roof. Free and no obligation.
- Free repair quotes
- No obligation
- Add a photo if you have one
- Homes in all 26 counties
