Ridge, Hip and Valley Repairs · All 26 counties

Ridge Tile Repair in Ireland: Ridges, Hips and Valleys

Free, no-obligation quotes for ridge, hip and valley repairs on Irish homes. Re-bedding, dry ridge systems, lead and GRP valleys.

  • Free repair quotes
  • No obligation
  • Add a photo if you have one
  • Homes in all 26 counties
Get a Repair Quote
Ridge, Hip and Valley Repairs on an Irish home
Materials our roofers work with

CedralVeluxKingspanFirestone EPDMLeadNatural Slate

What the repair involves

How Ridges, Hips and Valleys Are Repaired

Ridge and hip tiles run along the top and the corners of the roof, traditionally bedded in mortar. Over time the mortar cracks and washes out, and the tiles loosen or blow off in high winds. Valleys carry water where two roof slopes meet, so a blocked or split valley can let in a lot of water quickly.

Re-bedding ridge tiles

Loose ridge tiles are lifted, the old mortar is cleaned off, and the tiles are re-bedded in fresh mortar.

Get a repair quote

Dry ridge systems

A dry ridge system fixes each ridge tile mechanically, with no mortar to crack, and lets the roof space ventilate along the ridge.

Get a repair quote

Hip tiles

Hip tiles on the sloping corners of the roof are re-bedded or dry fixed in the same way as ridge tiles.

Get a repair quote

Lead valleys

Split or worn lead valleys are relined in new lead sheet, dressed and fixed to allow for expansion.

Get a repair quote

GRP valleys

GRP fibreglass valley troughs are a common replacement for worn lead or mortar valleys on tiled roofs.

Get a repair quote

Clearing valleys

Leaves, moss and debris build up in valleys and push water sideways under the slates. Clearing them is often the whole fix.

Get a repair quote
What to look for

Signs of Ridge or Valley Problems

Sign 1

Mortar in the gutter

Pieces of mortar in the gutter or on the ground below the ridge.

Sign 2

Crooked ridge line

A ridge line that is no longer straight, or a gap where a ridge tile is missing.

Sign 3

Gaps under ridge tiles

Daylight or gaps visible under the ridge tiles from the ground.

Sign 4

Damp along a valley

Wet timbers in the attic along the line of a valley, or damp in the corner of a ceiling.

Emergency steps

Leaking now? Do this first

  1. 1Move belongings and put a bucket under the drip.
  2. 2If water is near lights or sockets, switch off that circuit at the fuse board.
  3. 3Stay off the roof. Check from the ground or the attic only.
  4. 4Take photos of the ceiling, the attic and the roof from the ground.
  5. 5Request a repair quote and mark it as an emergency.

Mortar or Dry Fix?

Mortar bedded

The traditional method and often required on period homes and protected structures. Mortar needs checking and repointing over time.

Dry ridge

Mechanically fixed with clips and seals. No mortar to wash out, and it ventilates the roof space along the ridge.

Valley liners

Lead suits slate roofs and older homes. GRP valley troughs are common on concrete tile roofs.

Repair or replace?

What to expect
Usually a repair

A few slipped slates, one loose ridge, a failed flashing, a single flat roof split.

Time to ask about replacement

Leaks in several places, brittle or torn felt in the attic, slates flaking across the roof, a flat roof deck that feels soft.

Before work starts

Rules and Standards to Know

Slating standard

The NSAI Code of Practice S.R. 82:2017 sets slating and tiling practice for Irish pitched roofs, including fixings for Irish wind exposure.

Protected structures

Like-for-like repairs usually do not need planning permission. Homes on your local council's Record of Protected Structures are different, so check with the council before work starts.

Bats

All Irish bat species are protected. Works that disturb a roost need a derogation licence from the National Parks and Wildlife Service.

Working at height

Under the Construction Regulations 2013, a homeowner who hires a roofer is a client. Ask how the job will be made safe, including ladders, roof ladders or scaffolding.

From homeowners

What Homeowners Say About Our Local Roofers

“Had a bad leak over the kitchen after the recent lashing of rain, plus a few slipped slates near the gutter. Called these lads out and they sorted it straight away. Sound to deal with, quick, and left the gaff spotless. Spot on service.”
Ciaran, LucanLeak repair
“A few tiles blew off our roof during the wind last week. Got in touch and they had someone round the next morning to patch it up and match the old slates. Brilliant job, very reasonable price, and lovely lads. Cheers!”
Sinead, CarlowStorm damage repair
1 / 2
FAQs

Ridge, Hip and Valley Repairs: Questions Homeowners Ask

Is a dry ridge better than mortar?

Both work when installed properly. A dry ridge has no mortar to crack and ventilates the roof space. Mortar is traditional and often preferred on period homes and protected structures.

Can a ridge tile be refixed after a storm?

Usually, yes, if the tile is not broken. Ridge tiles that have blown off often break, so replacements of the same profile may be needed.

Why is my valley leaking?

The most common causes are a build-up of leaves and moss, split or worn lead, or cracked mortar along the valley edge. A roofer clears it first, then repairs or relines it.

Do ridge repairs need scaffolding?

Not always. Some ridge repairs are done from roof ladders, while others need scaffolding for safe access. The roofer decides based on the roof and the job.

What if there are bats in my roof?

Bats and their roosts are protected. Works that disturb them need a licence from the National Parks and Wildlife Service, and ridge work is a common time they are found.

Quote form

Get a Ridge Tile Repair Quote

Tell us what is happening with your roof. Free and no obligation.

  • Free repair quotes
  • No obligation
  • Add a photo if you have one
  • Homes in all 26 counties